|
Low Frequency Load Vented 2π sr NRS Coupled-Sub Configuration 4way WMT TM Alignment floor standing Drivers 1 Tweeter 38 mm soft dome T38 WaveGuide
1 Midrange 130 mm Paper Carbon Compound
1 Woofer 170 mm Paper Compound
2 Sub 170 mm Polymeric Compound Sensitivity 91dB SPL normalized to 1 m with 2.83Vrms pink noise within IEC 268-13 compliant listening room Low Frequency Cut Off 35Hz @ -3dB referred to C4 WETS Overlapping Points 280/800/1,250/1,450Hz (see PDF) Rated Impedance 4Ω Size 1,400x250x610mm (HxWxD) Weight 60kg Cabinet Solid walnut or solid cherry and HDF. The structure is made up of two cabinets: the lower, containing two subwoofers and the upper, containing one woofer, one midrange and one tweeter. The two wooden structures are separated by means of four cylindrical proprietary-engineered elastomer puffers which act as vibration de-couplers dissipating mechanical energy by orthogonal elongation Speakers Orientation The speakers should be tilted inward facing the listener Listening Distance Optimum speaker-listener distance is within 3.5 - 4.0m Listening Environment A carpeted floor in front of the speakers is recommended Side and Back Walls Should stay 1m away from the speaker front baffle at least Suggested Amplifier Normal amping Rated for 180W/4Ω max Average Power Run the cable from your power amplifier to the lower terminals of the subwoofer binding-post, then connect the upper terminals to the binding-post of the mid-high unit by means of the banana-plug terminated short cable, delivered with the speakers. Bi-amping Rated for 120W/4Ω max Average Power Run the cable from your power amplifier to the lower terminals of the subwoofer binding-post leaving the upper ones idle. Do the same to connect the power amplifier to the binding-post of the mid-high unit.
Notes
All quantities in SI Units Average Power computed as V2rms/R Overlapping Points is a proprietary implementation for un-conventional Xover Specs subject to change without notice
|